CELLOVIS 60 M - HPMC, Modified cellulose ether Application: Cellovis 60M is a modified grade and multifunctional additive for gypsum, ready-made and dry mixes. The water-holding properties of cellulose additives increase open time and impart processability, lubricity, shrinkage and cracking resistance, void reduction and adhesion. In dry mix systems, this product provides rapid dissolution and light viscosity for reliable performance. Usage: Usage level varies depending on usage.

CELLOVIS 150 M- HPMC (Hydroxypropyl methylcellulose) Application: Cellovis 150M is a modified grade and multifunctional additive for gypsum, ready-mixes and dry mixes. The water-holding properties of cellulose additives increase open time and impart processability, lubricity, shrinkage and cracking resistance, void reduction and adhesion. In dry mix systems, this product provides rapid dissolution and light viscosity for reliable performance. Usage: Usage level varies depending on usage.

VINNAPAS 5044 N (ULS) - Dispersible Polymer Powders VINNAPAS 5044 N (ULS) is a dispersible polymer powder for dry mortar, specifically suitable for ETICS, waterproofing membranes and concrete repair. It is based on a highly flexible copolymer of vinyl acetate and ethylene and belongs to the VINNAPAS N product class, which means it has a neutral effect on rheology and provides the essential properties of adhesion and flexibility, allowing a high degree of formulation freedom. VINNAPAS 5044 N (ULS) is part of our standard line and offers a best-in-class solution for a wide range of applications.

VINNAPAS 5043 N- Dispersible polymer powders VINNAPAS 5043 N is a dispersible polymer powder for dry building mixtures, specifically suitable for ETICS. It is based on a highly flexible copolymer of vinyl acetate and ethylene and is classified as a VINNAPAS N product, which means it has a neutral effect on rheology and provides the essential properties of adhesion and flexibility. VINNAPAS 5043 N is part of our standard line-up and offers you best-in-class solutions.

VINNAPAS 8034 H- Dispersible Polymer Powders VINNAPAS 8034 H is a very durable hydrophobic dispersible polymer powder for dry mortars, especially suitable for grouting tiles, renders and renders, and skim coats. It is based on a flexible terpolymer of vinyl chloride, ethylene and vinyl laurate. VINNAPAS 8034 H belongs to the VINNAPAS H product class, which means that in addition to adhesion, it provides a remarkable hydrophobic effect.

VINNAPAS 5010 N (GER) - Dispersible polymer powders VINNAPAS 5010 N is a universal dispersible polymer powder for dry construction mixtures, specially designed for tile adhesives, plasters and grouts. It is based on a solid copolymer of vinyl acetate and ethylene and belongs to the VINNAPAS N product class, which means that it has a neutral effect on rheology and provides the main properties of adhesion and flexibility, allowing a high degree of formulation freedom. VINNAPAS 5010 N (Germany) is part of our standard line and offers a best-in-class solution for a wide range of applications.

VINNAPAS 8031 ​​H- Dispersible Polymer Powders VINNAPAS 8031 ​​H is a hydrophobic dispersible polymer powder for dry mortars, especially suitable for grouting tiles, renders and renders, and for finishing coats. It is based on a flexible terpolymer of vinyl chloride, ethylene and vinyl laurate. VINNAPAS 8031 ​​H belongs to the VINNAPAS H product class, which means that, in addition to adhesion and flexibility, it provides a remarkable hydrophobic effect to the cured mortar.

SILRES BS 1310 - Silicone liquid emulsions SILRES BS 1310 is a solvent-free, water-borne emulsion of polysiloxane modified with a functional silicone resin.

SILRES BS 45- Silicone resin emulsions SILRES BS 45 is a water-borne, solvent-free silicone resin emulsion used as a binder in the production of silicone resin emulsion paints and plasters.

VINNACEL 808- Dispersible polymer powders VINNACEL 808 is a plasticizing dispersible polymer powder based on vinyl acetate and ethylene with an instant plasticizing and stabilizing effect. The product is in the process of being introduced into industrial use (product for scaling). Therefore, product data is subject to change. Always consult WACKER POLYMERS regarding product availability before using it for industrial purposes.

DXPOL R3 - Polymer powder Description: Redispersible polymer powder is a powder form of a special emulsion (high molecular weight polymers) after spraying and drying. It is also called dry powder glue. Easily dissolves in water and quickly forms an emulsion similar to the original emulsion. The membrane is formed after moisture evaporates. This type of membrane has high flexibility, good climate resistance and high adhesion to various substrates. Application: It can be widely used in building construction, such as heat preservation and insulation of exterior walls, tile bonding, interface treatment, gypsum whitewashing, gypsum bonding, building interior and exterior wall putty, decorative mortar, etc. It is non-poisonous, tasteless, environmentally friendly. , and also convenient for transportation.

DXPOL N6 - Polymer powder Product Description: Redispersible polymer powder is a powder form of a special emulsion (high molecular weight polymers) after spraying and drying. It is also called dry powder glue. Easily dissolves in water and quickly forms an emulsion similar to the original emulsion. The membrane is formed after moisture evaporates. This type of membrane has high flexibility, good climate resistance and high adhesion to various substrates. Application: It can be widely used in building construction, such as heat preservation and insulation of exterior walls, tile bonding, interface treatment, gypsum whitewashing, gypsum bonding, building interior and exterior wall putty, decorative mortar, etc. It is non-poisonous, tasteless, environmentally friendly. , and also convenient for transportation.

IPOX ER 15 In the field of thin film paints and coatings, completely new types of hybrid systems have emerged in recent years. Aliphatic or cycloaliphatic epoxy resins, especially ipox ER 15, are combined with silicone resins (eg SILRES® HP 2000 or Dow Corning® 3055 Resin). The resulting coating systems have ultra-high hardness, are extremely resistant to yellowing and weathering and are particularly suitable as excellent anti-corrosion coatings that meet high optical requirements. Thanks to savings in application as well as longer service life, they are also extremely cost-effective. Application: Epoxy-Siloxane coatings for corrosion protection, High chemical resistant paints, Coatings for civil engineering. IPOX ER 1042- Bisphenol A/F epoxy resin, monofunctional reactive thinner. PROPERTIES: Modified epoxy resin Hydrophobic character Excellent wetting of fillers and substrate APPLICATIONS: Construction coatings Solvent-free coatings Pouring resins Paints

IPOX ER 1022- Bisphenol A epoxy resin, monofunctional reactive thinner. PROPERTIES: Modified epoxy resin Hydrophobic character Excellent wetting of fillers and substrate APPLICATIONS: Construction coatings Solvent-free coatings Pouring resins Paints

IPOX EH 2042 - modified cycloaliphatic amine (without alkylphenols inside). PROPERTIES: Hardener for epoxy resins Excellent chemical resistance Excellent curing Good resistance to yellowing APPLICATIONS: Epoxy mortars and coatings for construction. Chemical resistant coatings Potting resins Universal use

IPOX EH 2072 - modified cycloaliphatic amine (without alkylphenols inside). PROPERTIES: Hardener for epoxy resins Excellent chemical resistance Excellent resistance to yellowing APPLICATIONS: Pigmented and non-pigmented coatings for industrial floors. Chemically resistant coatings Universal use

IPOX EH 2065 - modified cycloaliphatic amines PROPERTIES: Hardener for epoxy resins VOC-free 100% reactive components Low tendency to yellowing APPLICATION: Universal hardener Topcoats

IPOX EH 2471W-Polyamine adduct in water PROPERTIES: Hardener for liquid epoxy resins. Emulsifier for liquid epoxy resin Low viscosity Low odor APPLICATION: Impregnations and paints based on two-component epoxy systems. Self-leveling coatings

CLEARPOX PROPERTIES: Epoxy casting system Very long application time Low heat generation Very low yellowing tendency No alkylphenols No VOCs Outstanding air release properties Optimized UV stability APPLICATIONS: Highly transparent casting system for applying very thick coatings in one step. For artistic and decorative use

STAPA HYDROPOR STAPA HYDROPOR pastes allow the processing of aluminum pigments without dust and are therefore an important safety factor. STAPA HYDROPOR pastes are water-based and therefore do not contain hydrocarbon solvents. In addition, they are easily dispersed and contribute to fast processing and reduced mixing time.

STAPA HYDROPOR N 503/75 Aluminum paste STAPA Hydropor is an aluminum paste for the production of lightweight concrete (AAC). The pastes are water-based and practically do not contain hydrocarbon solvents. These pastes are easy to disperse, dust-free, quick and safe to use. STAPA Hydropor pastes can be adapted to customer needs by varying the particle size and initial reaction delay. STAPA Hydropor N 503/75 is used for medium-density materials in compositions with lime and cement content < 1.

STAPA HYDROPOR N 1003 Aluminum paste STAPA Hydropor is an aluminum paste for the production of lightweight concrete (AAC). The pastes are water-based and practically do not contain hydrocarbon solvents. These pastes are easy to disperse, dust-free, quick and safe to use. STAPA Hydropor pastes can be adapted to customer needs by varying the particle size and initial reaction delay. STAPA Hydropor N 1003 is used for very low raw material densities in compositions with lime and cement contents < 1.

STAPA HYDROPOR N 903 Aluminum paste STAPA Hydropor is an aluminum paste for the production of lightweight concrete (AAC). The pastes are water-based and practically do not contain hydrocarbon solvents. These pastes are easy to disperse, dust-free, quick and safe to use. STAPA Hydropor pastes can be adapted to customer needs by varying the particle size and initial reaction delay. STAPA Hydropor N 903 is used for low density raw materials in compositions with lime and cement content < 1.

STAPA ALUPOR STAPA ALUPOR pastes are foaming pastes based on diethylene glycol. These anhydrous products have an extended shelf life, making them especially attractive for use in warmer regions. The STAPA ALUPOR paste product category provides good wettability with water and is therefore easily dispersed. This allows dust-free processing and is therefore an important factor contributing to safety.

STAPA ALUPOR N 313 STAPA Alupor N – aluminum pastes for the production of lightweight concrete (AAC). These pastes do not contain diethylene glycol based water. These products have an extended shelf life, making them especially attractive for use in warmer regions. STAPA Alupor pastes have good water wettability and are therefore easily dispersed. They provide dust-free processing and are therefore an important factor contributing to safety. STAPA Alupor N 313 is used for medium and high density raw materials in compositions with lime and cement content < 1.

STAPA® ALUPOR N 913 STAPA® Alupor N - aluminum pastes for the production of lightweight concrete (AAC). These pastes do not contain diethylene glycol based water. These products have an extended shelf life, making them especially attractive for use in warmer regions. STAPA® Alupor pastes have good water wettability and are therefore easily dispersed. They provide dust-free processing and are therefore an important factor contributing to safety. STAPA® Alupor N 913 is used for very low and low raw material densities in formulations with lime and cement contents < 1.

STAPA® ALUPOR N 513 Aluminum paste STAPA® Alupor N - aluminum pastes for the production of lightweight concrete (AAC). These pastes do not contain diethylene glycol based water. These products have an extended shelf life, making them especially attractive for use in warmer regions. STAPA® Alupor pastes have good water wettability and are therefore easily dispersed. They provide dust-free processing and are therefore an important factor contributing to safety. STAPA® Alupor N 513 is used for low and medium density raw materials in formulations with lime and cement content < 1.

CALCIUM FORMATE—Hardening accelerator Application: Can be used in tile adhesives, cement-based construction chemicals as a concrete hardening accelerator. Usage: Usage level varies depending on usage.

CITRIC ACID—Cure Retarder Description: Anhydrous citric acid is produced by submerged fermentation from the carbohydrate substrate glucose and/or sucrose. Cargill Citric Acid is manufactured in accordance with current Good Manufacturing Practices (GMP) standards through a comprehensive HACCP (Hazard Analysis and Critical Control Points) program. Citric acid is available as translucent white crystals. Citric acid has a tart, sour taste, is slightly hygroscopic and melts at 153°C (307°F).

TARTARIC ACID L (+)-Set retarder Description: Natural tartaric acid is obtained from grape by-products such as pomace, filter cake and liquid wine lees. The production process is based on water. Superiority is achieved through two stages of crystallization.

ZINC STEARAT—Zinc Stearate Description: Zinc stearate is a neutral zinc soap and the most powerful mold release agent. It has a hydrophobic effect and protects rubber from sticking. Used as external lubricant. It is highly compatible with all types of plastics and coatings.

POWDER ANTIFOAM AGENT Description: It is an antifoam agent based on a mixture of mineral oil and nonionic surfactants on an inert carrier. Application: Recommended dosage for some typical applications: Self-leveling underlayments: 0.1 – 0.3% Fiber-containing screeds: 0.1 – 0.3% Cement-based adhesives: 0.1 – 0.3%.

STARCH ETHER-Starch Ether Description: Starch esters improve the workability and performance properties of construction products. If you use it with HPMC (hydroxypropyl methylcellulose) in cement tile, mortar, gypsum stucco, you will see superior thickening, water retention and workability. Features and Benefits: Cold water solubility and viscosity characteristics are expressed. Excellent thickening, effectively prevents sagging and anti-segregation, excellent viscosity stability in alkaline media, special rheological properties, which improves lubricity and performance. Cost-saving effects of HPMC rheology amendments and alternatives.

SUPERPLASTICIZER Description: It is a free-flowing, spray-dried powder of a melamine-based sulfonated polycondensation product. Superplasticizer for materials based on cement and calcium sulfate.

PP FIBER – 3mm, 6mm, 12 mm Description: PP fiber M6 is a monofilament polypropylene fiber with optimal mechanical, physical and chemical properties for use in concrete and mortars. Application: Large surface area per amount of fiber (615 m2/kg), high level of adhesion, invisible on the surface. No health risks, chemically inert and durable, easy to mix, easy to pump, no abrasion on pipes and hoses. 100% alkali resistant, acid and solvent resistant.

SODIUM GLUCONATE-Sodium Gluconate Description: Sodium gluconate is a compound with the formula NaC6H11O7. It is the sodium salt of gluconic acid. It has the E number E576, which is a code for chemicals that can be used as food additives for use in the European Union and Switzerland ("E" stands for "Europe"). Sodium gluconate is widely used in textile dyeing, printing and metal surface cleaning. It is also used as a chelating agent, steel surface cleaner, glass bottle cleaner, and as a chelating agent in the cement, plating and alumina industries. It is a white, colorless powder, highly soluble in water.

SODIUM FORMATE- Sodium Formate Description: Sodium formate is a white crystalline material of high purity. It is used in the production of sodium hydrosulfite/dithionite, a pulp and paper brightener, in the leather tanning process, and as a de-icer. It is non-toxic, biodegradable and environmentally friendly. Application: Production of sodium hydrosulfite Production of formic acid, leather tanning To increase oil and gas production, enzyme stabilizer in detergents.